View host performance information on the LogMeIn Dashboard

You can view the performance details of a host.

Who can use this feature? The Host Performance Information feature is available for the following:

Basic/Plus/Premier Subscription	Modular Subscription
Plus Premier	Base

Note: You must have the Allow full Remote Control permission enabled to use this feature.

To access remote management features:

From the LogMeIn.com website, go to the Computers page and click the Dashboard link.
From the LogMeIn Central Client, go to the Main Menu. Once connected, click Show Detailed Mode.

Remember: Once connected, you must be in Detailed Mode (Dashboard) to see remote management options.

Remember: A former Plus or Premier subscription, or a current Base module subscription is required to use this feature. You must have the Allow full Remote Control permission enabled to use this feature.

These features are available on Windows hosts only.

Viewing CPU load

View metrics for CPU load on all processors on a host.

Fastpath: On the Computers page, select Dashboard next to a host to connect to a Windows computer and then go to Performance Info > CPU Load

Hold your mouse over a graph to see when the sample was taken (each shows a different sampling frequency – 2 seconds, 10 seconds, 5 minutes, 1 hour)
Use the numbered buttons to switch between CPUs if the host has more than one
Select any item in the Most CPU-Intensive Processes list to view process details

Viewing memory load

View metrics for system memory load on a host.

Available on Windows hosts only.

Fastpath: On the Computers page, select Dashboard next to a host to connect to a Windows computer and then go to Performance Info > Memory Load

Use the drop-down list to choose the data type displayed in the graphs:
- Memory Load
- Physical Memory Load
- Commit Memory Load
Hold your mouse over a graph to see when the sample was taken (each shows a different sampling frequency – 2 seconds, 10 seconds, 5 minutes, 1 hour)

Viewing disk space utilization

View metrics for disk space utilization per logical disk on a host.

Available on Windows hosts only.

Fastpath: On the Computers page, select Dashboard next to a host to connect to a Windows computer and then go to Performance Info > Disk Space

Use the drop-down list to switch between available disks
Hold your mouse over a graph to see when the sample was taken (each shows a different sampling frequency – 2 seconds, 10 seconds, 5 minutes, 1 hour)

Viewing drive and partition information

View details regarding physical drives and partitions and logical drives on a host.

Available on Windows hosts only.

Fastpath: On the Computers page, select Dashboard next to a host to connect to a Windows computer and then go to Performance Info > Drive and Partition Info

To manage files on a drive, select a drive link.

Viewing open TCP/IP ports

See the TCP/IP ports open on a host computer.

Available on Windows hosts only.

Fastpath: On the Computers page, select Dashboard next to a host to connect to a Windows computer and then go to Performance Info > Open TCP/IP Ports

Specify the type of port(s) you want to view
- Listening ports (ports that are listening for connections)
- Connected ports (ports that have been connected to another computer)
- Everything else (ports in various stages of being connected and disconnected)
Select Resolve IP addresses to resolve IP addresses appearing in the list of Local names.
Result: This can take a considerable amount of time to process.
Select Continue.
Result: A list of ports is displayed.

What to do next:

Once you have generated the list, you can change the ports you are viewing using the boxes on the toolbar and selecting Refresh.

Viewing network traffic information

Check the network traffic of a host.

Available on Windows hosts only.

Fastpath: On the Computers page, select Dashboard next to a host to connect to a Windows computer and then go to Performance Info > Network Load

To view traffic for a network, select any listed network
To see total network traffic, select Inbound Network Traffic or Outbound Network Traffic

Viewing a list of open files

View a list of all files currently open on a host, along with the names of associated processes.

Available on Windows hosts only.

Fastpath: On the Computers page of the LogMeIn.com website, select Dashboard to connect to a Windows computer and then go to Performance Info > Open Files

Select a process to view process details
To end a process, select End Process on the toolbar

Viewing a list of registry keys open on a host

See the registry keys that are open on a host computer.

Available on Windows hosts only.

Fastpath: Connect to a Windows computer and go to Performance Info > Registry Keys in Use

Select a process to view process details
To end a process, select End Process on the toolbar

Viewing a List of DLLs in use

View a list of all currently loaded dynamic link libraries and the processes that use them.

Available on Windows hosts only.

Fastpath: On the Computers page, select Dashboard next to a host to connect to a Windows computer and then go to Performance Info > DLLs in Use

Select a process to view process details
To end a process, select End Process on the toolbar

Viewing host connection details

Display all connections being served, including the IP address and host name of any computer making a remote connection, the type of connection, and the name of the Windows user associated with the connection.

Available on Windows hosts only.

Fastpath: On the Computers page, select Dashboard next to a host to connect to a Windows computer and then go to Performance Info > LMI Connections.

Viewing installed applications

View a list of applications installed on a host. The list is populated from Add or Remove Programs on the host's Control Panel.

Available on Windows hosts only.

Fastpath: On the Computers page, select Dashboard next to a host to connect to a Windows computer and then go to Performance Info > Installed Applications

Move your mouse over a listed application to view available data, such as estimated size, installation source, registration data, and time and date of last use
Select any Installation Directory link to work with files in the File Manager

Viewing loaded device drivers

The information is view only.

Available on Windows hosts only.

Fastpath: On the Computers page, select Dashboard next to a host to connect to a Windows computer and then go to Performance Info > Loaded Device Drivers.